Mold Gyaran YAG Laser Welding Machine

Samu Gwajin Samfuran Kyauta

Matsayi:

Mold Gyaran YAG Laser Welding Machine

Takaitaccen Bayani:

Herolaser Laser mold gyare-gyaren walda na iya sauri da kuma daidai gyara pores, slag ramuka, da shrinkage ramukan kafa a lokacin da simintin tsari.Ƙwararrun Gyaran Laser Welding Experts.

Aika mana imel

Cikakken Bayani

Siffofin fasali

Bidiyo

Zazzagewa

Yadda ake yin oda

Gabatarwar Samfur

Herolaser mold gyara Laser waldi inji jerin ne na musamman ga mold masana'antu ayyuka, wannan model sadaukar domin maye gurbin gargajiya argon welder domin gyara daidai kyawon tsayuwa.Ana shigo da duk mahimman abubuwan wannan injin.Manhajar aiki ta software tana amfani da babban allon LCD da nunin dubawar harsuna da yawa, yana da sauƙi da sauƙi don amfani da mai aiki.Yanayin saiti da yawa, kuma na iya tsarawa ta masu amfani, aikin ƙwaƙwalwar ajiya na dindindin, masu dacewa da kayayyaki iri-iri.

An sanye shi da tsarin kulawa na microscope na musamman, haɓaka 10x;Akwai na'urar kariya ta matattara mai sauri don kare idanuwan ma'aikaci daga lalacewar Laser, rage gajiyar idon mai aiki da inganta ingantaccen aiki.

Tsarin kariyar argon mai daidaitawa tare da sarrafa microcomputer na ciki zai iya hana walda daga zama oxidized kuma ya sa waldi ya fi ƙarfi da kyau;Ana iya adana Argon zuwa mafi girma ta hanyar ɗaukar ikon aiki tare tare da fitar da Laser

Tankin ruwa na na'urar walda Laser na robot na iya zafi da sanyaya injin, kuma yana kula da yanayin ruwan a ainihin lokacin.Yana da yanayin zafin jiki / wurare dabam dabam

The Laser rundunar majalisar za a iya fili lura da samfurin sakawa da waldi sakamako bisa ga ja haske nuni

Babban kayan aikin injin da wurin da aka sanya kayan aikin walda sun dace da Laser don walda kayan aikin.

Ma'aunin Fasaha

MISALI:	ML-WY-BP-DB-W200	ML-WY-BP-DB-W400
3 - bugun jini na aikin benci	X=300mm, Y=200mm(X,Ana iya daidaita Y da hannu kuma ana iya ɗaga axis z-axis)
Ƙaddamar da benci na aiki	≤200KG
Tushen wutan lantarki	220V± 10%/50Hz Ko 380V±10%/50Hz
Alamar Laser
Nau'in Laser	Nd: YAG bugun jini
Daidaita kewayon wurin haske	0.1～0.3mm ku
Girman tabo mai haske	0.2-3.0mm ku
Laser tsawon zangon	1064nm ku
Faɗin bugun bugun jini	0.5～25ms ku
Matsakaicin ƙarfin laser	200W	400W
Mitar bugun jini	≤50Hz
Tsawon fitarwa na Laser	80mm/100mm/120mm (na zaɓi)
Laser sanyaya	Ruwa sanyaya
Tsarin lura	Microscope (360° daidaitacce)
Gas na kariya	Layi daya (xenon)
Siga mai siyarwa
Walda diamita	0.1mm～0.8mm ku

Babban Siffofin

1. Zafi shafi yankin ne kananan, kadan nakasawa ga daidai molds.
2. Zurfin walda yana da girma, walƙiya da ƙarfi.Isasshen fuse, babu gyaran burbushi.Babu wasu abubuwa masu ban mamaki a haɗa matsayi na sassan tsinkaya da ɓarna ɓangaren narkakken abu mai narkewa.
3. Low oxidation rate, launi na sassa masu sarrafawa ba shi da kyau.
4. Babu stomata ko rami yashi da ya ɓace bayan walda.
5. Ana iya sarrafa sassan waldawa, musamman dacewa da buƙatun polishing na gyaran gyare-gyare.
6. Sassan sarrafawa na iya kaiwa zuwa 50 zuwa 60 taurin Rockwell.

Babu nakasawa na walda mutu

Wurin da ke fama da zafi yana da ƙananan, wanda ba zai haifar da lalacewa na madaidaicin mutu ba, kuma babu damuwa a haɗin gwiwa tsakanin ɓangaren ɓangaren narkakken abu a cikin narkakken tafkin da matrix.

● A oxidation kudi ne low kuma workpiece ba zai canza launi bayan waldi
● Wurin dumama ƙananan ƙananan ne, kuma sassan da aka yi amfani da su ba za su lalace ba
● Ba za a sami pores ko trachoma bayan walda ba
● Bayan waldawa, ana iya goge shi ba tare da ya shafi tasirin ba